Rig-Tech provides autoclave solutions for your medium and high pressure applications. Our instrument fitters are skilled in using autoclave equipment, tools and fittings and how to properly install autoclave tubing. The tubing and autoclave fittings are commonly used in the oil and gas industry. To ensure that you get the most out of your autoclave system you have to make sure that you get the installation right. That is one area you can depend on Rig-Tech instrument fitters because Proper installation guarantees that the components will work as expected without failure. We install the system as recommended by the manufacturer for maximum efficiency.

Proper Autoclave installation

The first step is to ensure that you have all the components that you need. You will then insert the tubing into the fitting properly. Once you are done, you have to check that the fitting nut is tight enough. The hydraulic presetting tools can assist you with installation of area where it is hard to reach. You will also need these tools when you are installing the larger-sized tubing.

There are manual presetting tools that you can use to install the one-inch tubing. They can also be used to install the undersized fittings. The tools are designed to give you access to areas that you cannot reach. The tube stub adapters will be needed especially when you face alignment issues. They will make your work a lot easier. There is also the port connector that you will require to close the connections between tube fittings. The autoclave fittings need to be installed correctly for the best performance and durability. The nut and ferrule safety changer will allow you to replace the fitting components in the safest way possible. You will not handle the ferrule and it ensures that the ferrule is properly oriented. There is also the tube inserts that you will need to support the plastic tubing and make sure that it performs at its best.